Casio PRIVIA PX-3S User Manual

Contents

Casio PRIVIA PX-3S User Manual Manual pdf 32 page image

E-30Editing Zone ParametersThis section explains the meaning of each zoneparameter, and provides information about theirsetting ranges and initial default values.• In this section, each parameter is preceded by anumber and a letter, like “1-A”. This indicates thecommon menu page number (1) and thePARAMETER SELECTOR button you need to pressto select it (A).• In this section, the name of each zone parameter isfollowed by and/or .• The values following the description of a parameterare its setting range. The initial default setting isindicated by an asterisk (*).Mixer SettingsAdjusts the volume level. 0 is mute, 127is maximum volume.0 to 127*Adjusts the pan position. 0 specifies acenter pan position, a negative valueshifts it to the left, and a positive value shifts it to theright.–64 to 0* to +63Shifts the pitch upwards or downwardsin octave steps. Changing this settingalso shifts the note number sent to an external MIDIdevice.–2 to 0* to +2MIDI SettingsSpecifies the MIDI channel used by each zonewhen sending MIDI data.1 to 16 (*UPPER 1: 1, UPPER 2: 2, LOWER 1: 3,LOWER 2: 4)Specifies the value of the bank MSB that isappended when sending a program changeto an external destination with operation 2-D.0* to 127Specifies the value of the bank LSB that isappended when sending a program changeto an external destination with operation 2-D.0* to 127Specifies the program change number sent toan external destination. Any time this valueis changed, the corresponding numbered programchange is sent to an external destination (withoutaffecting the internal sound source).0* to 127DSP SettingsSelects tremolo, rotary, or some other DSPtype. The DSP type is indicated by “ton”(which is the initial default for each tone) or a numberfrom 1 to 64. Any time the bk (EDIT w, q) buttonsare used to switch the number, the DSP type name thatcorresponds to the current number will appear on thedisplay.The parameters displayed in 3-B depend on the DSPtype selected here.In accordance with the DSP type selected in3-A, displays the name of the parameterswhose settings can be configured. When there aremultiple parameters, you can use the bk (EDIT w,q) buttons to scroll through them. Perform theoperation under 3-C to change the setting of aparameter.Zone Parameter Settingsindicates a setting that applies to internalsound source control.indicates a setting that applies to externalMIDI device control.■ 1-A Volume (Vol)■ 1-B Pan■ 1-C Octave Shift (Oct)INT EXTINTEXTINT / EXTINT / EXTINT / EXT■ 2-A MIDI Out Channel (MidCh)■ 2-B Bank MSB (BnkMS)■ 2-C Bank LSB (BnkLS)■ 2-D Program Change (Prog)■ 3-A DSP Type (DSP)■ 3-B DSP Parameter (Parameter)EXTEXTEXTEXTINTINTINTINT