E-8Playing with Different TonesUse the following procedure to layer two tones, so theysound at the same time.When specifying two tones for layering, first tone youselect will be the main tone, while the second tone willbe the layered tone.1. While holding down the FUNCTION button,hold down the keyboard key for the main toneas you press the keyboard key for the layeredtone.Example: To layer HARPSICHORD and ELEC ORGAN 12. To unlayer the keyboard, select another toneby pressing the GRAND PIANO button or byusing the procedure under “Selecting andPlaying a Tone” (page E-6).NOTE• You cannot layer the BASS 1 or BASS 2 tone withanother tone.• You cannot perform the layer operation whenrecording to Track 2.To adjust the volume balance betweentwo layered tones1. While holding down the FUNCTION button,use the keyboard keys shown below to adjustthe volume of the layered tones.• To return the volume setting to its initial default, holddown the FUNCTION button and press both of thekeys at the same time.Layering Two TonesHARPSICHORDELEC ORGAN 1C1 C2 C3 C4 C5 C6 C7 C8Initial default (Center)Volume of the main tone(First tone you selected)Volume of the layered tone(Second tone you selected)