EnglishPlaying with Different TonesE-9To turn reverb on and off1. While holding down the FUNCTION button,press the MODERN button to toggle reverbon (lamp lit) and off (lamp unlit).To turn chorus on and off1. While holding down the FUNCTION button,press the CLASSIC button to toggle choruson (lamp lit) and off (lamp unlit).To configure reverb and chorus effectsettings1. While holding down the FUNCTION button,press one of the Reverb or Chorus keyboardkeys.Example: Selecting Reverb 4• Reverb Value• Chorus Value■ About DSPDSP makes it possible to digitally produce complexacoustic effects. The DSP is assigned to each tonewhenever you turn on digital piano power.Your digital piano comes equipped with three pedals:damper, soft, and sostenuto.Pedal Functionsz Damper PedalPressing the damper pedal while playing will cause thenotes you play to reverberate for a very long time.• When a GRAND PIANO tone (MODERN, CLASSIC,MELLOW, BRIGHT, VARIATION) is selected as thetone, pressing this pedal will cause notes toreverberate (with acoustic resonance) just like thedamper pedal on an acoustic grand piano. Half-pedal operation (pressing the pedal part way) is alsosupported.z Soft PedalPressing this pedal while playing suppresses notesplayed on the keyboard after the pedal was pressed,and makes them sound softer.z Sostenuto PedalOnly the notes of the keys that are depressed when thispedal is pressed are sustained until the pedal isreleased.Using EffectsReverb : Makes your notes resonate.Chorus : Adds more breadth to your notes.To do this: Select this setting:Turn on reverb 1: Room2: Small Hall3: Large Hall4: StadiumTo do this: Select this setting:Turn on chorus 1: Light Chorus2: Medium Chorus3: Deep Chorus4: Flanger (Whooshing effect)1 2 3 4 1 2 3 4ChorusReverbUsing the Digital Piano’sPedalsSoft pedal Damper pedalSostenuto pedal