Note: X 0 through 5 correspond respectively to Layers 1 through 6.Note1: For information about the relationship between setting values and send/receive values, see “33.1 Off/On Setting ValueTable” in “VIII Setting Values and Send/Receive Values” of this document.Note2: For information about the relationship between setting values and send/receive values, see “33.28 Octave Shift SettingValue Table” in “VIII Setting Values and Send/Receive Values” of this document.Note3: For information about the relationship between setting values and send/receive values, see “33.5 Pan Setting ValueTable” in “VIII Setting Values and Send/Receive Values” of this document.Hex Layer DetuneParameter MSB LSB NotesDetune 56H 00H Note1Note1: For information about the relationship between setting values and send/receive values, see “33.27 Hex Layer DetuneSetting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.Drum Inst Edit Setting values are applied in relation to reference values possessed by tones.Parameter MSB LSB NotesFilter Cutoff 14H XXHFilter Resonance 15H XXHAmp&Filter Attack Time 16H XXHAmp&Filter Decay Time 17H XXHCoarse Tune 18H XXHFine Tune 19H XXH Note1Volume 1AH XXHPan 1CH XXHReverb Send 1DH XXHChorus Send 1EH XXHDelay Send 1FH XXHNote: XX 00 through 7F correspond respectively to Inst C- through G9.Note1: For information about the relationship between setting values and send/receive values, see “33.26 –256 - 0 - +255Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.7.26 RPN (64H,65H)Message Format: BnH 64H llH (LSB)BnH 65H mmH (MSB)n: MIDI Channel Numberll: LSB Valuemm: MSB Value19