• Hex LayerThis setting optimizes for hex layer tones. The damper pedal performs on/off operations.Stage Setup Number Switching by Bank Select Message and Program Change MessageThe bank select message and program change message can be used to switch the stage setup number.The change target can be switched by the bank select MSB. The change target is specified by the programchange number. The bank select LSB is ignored.Change Target Bank Select MSBStage Setup 70HWhen Stage Set.Chg NRPN is enabled by Instrument settings, number switching by bank select andprogram change is ignored. For details about stage setups, see the Instrument’s User’s Guide.9 Channel After TouchMessage Format: DnH vvHn: MIDI Channel Numbervv: ValueReceive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. Inthe case of a tone that already has modulation applied, receipt of this message increases the modulationdepth. The modulation effect differs according to the tone being used.10 Pitch BendMessage Format: EnH llH mmHn: MIDI Channel Numberll: Value LSBmm: Value MSBTransmit Sent when the bender is operated.Receive Receipt changes the pitch of the currently sounding note. The range of the pitch changedepends on the Bend Range value setting.23
