E-36Recording Your Keyboard Play6. To exit the Song Recorder, press the 4(SONG RECORDER) button again so itslamp goes out.NOTE• Recorder memory capacity is approximately 10,000notes per song. When remaining capacity is 100notes or less, the 4 (SONG RECORDER) buttonlamp will flash at high speed. Recording will stopautomatically when memory becomes full.• Repeat, fast reverse, fast forward, pause, and tempoadjustment during playback are the same as whenplaying back user songs. See “Listening to SongsLoaded from an External Source” (page E-25) formore information.• You can listen to the song data currently stored inrecorder memory at any time by pressing the4 (SONG RECORDER) button to enter theplayback mode and then pressing bs (START/STOP).IMPORTANT!• A new recording replaces (deletes) previouslyrecorded contents.• If power to the Digital Piano is cut off while recordingis in progress, everything you recorded up to thatpoint will be deleted. Take care so power is notturned off accidentally during recording operations.You can record up to five songs (numbered 1 through5) in memory. After that, you can select a specific songfor playback.1. Use the 4 (SONG RECORDER) button tocycle through the Song Recorder modes untilthe lamp above the SONG RECORDERbutton is lit. This is the Song Recorderplayback mode.2. While holding down the cs (FUNCTION)button, press the 4 (SONG RECORDER)button.This displays the song selection screen.3. Use the ct (w, q) buttons to select thesong number you want.4. Press the dm (EXIT) button to exit the songselection screen.5. To record to the currently selected song,press the 4 (SONG RECORDER) button. Toplay back the currently selected song, pressthe bs (START/STOP) button.6. If you are recording, continue from step 2under “Recording to Built-in Song Memory(Song Recorder)” (page E-35).Unlit: Song Recorder offRecording or Playing BackMultiple SongsLit: Playback mode