Casio Privia PX-110 User Manual

Also see for Privia PX-110: Safety precautions Function guide Service manual

Casio Privia PX-110 User Manual Manual pdf 10 page image

E-8 404A-E-010BPlaying with Different TonesChanging the Effect TypeThere are four reverb and four chorus types.1 Turn on the effect you want to change.2 While holding down the FUNCTIONbutton, press the REVERB or CHORUSbutton to cycle through the effect typesettings as shown below.[Reverb][Chorus]About DSPDSP makes it possible to digitally produce complexacoustic effects.The DSP is assigned to each tone whenever you turnon digital piano power.Turning DSP On and Off1 While holding down the FUNCTIONbutton, press one of the keyboard keysshown below to turn DSP on or off.Room 1 Room 2 Hall 1 Hall 2Chorus 1 Chorus 2 Chorus 3 Chorus 4NOTE• Under initial default settings, DSP is on for the maintone, and layer and split are turned off. DSP can beapplied to only one part as shown below.• You can turn chorus on or off for each main tone,layer tone, and split tone part.• You cannot turn reverb on or off for each main tone,layer tone, and split tone part.Using the Piano’s PedalsThe digital piano is equipped with two pedal jacks, onefor a damper pedal and one for a soft/sostenuto pedal.Pedal functions• Damper PedalPressing the damper pedal while playing will causethe notes you play to reverberate for a very longtime. When GRAND PIANO 1 or 2 is selected asthe tone, using this pedal causes note to reverberatejust like the pedal on an acoustic grand piano.• Soft PedalPressing this pedal while playing weakens notesplayed on the keyboard after the pedal was pressed,and makes them sound softer.• Sostenuto PedalOnly the notes of the keys that are depressed whenthis pedal is pressed are sustained until the pedalis released.OffOnC1C2C3C4C5C6C7C8Initial DefaultsLayer Tone DSP OnSplit Tone DSP OnMainToneOnOffOffLayerToneOffOnOffSplitToneOffOffOnSP-3