E-5Connections404A-E-007AIMPORTANT!• Whenever connecting external equipment, first set theVOLUME knob of the digital piano and the volumecontroller of the external equipment to relatively lowvolume settings. You can later adjust volume to the levelyou want after connections are complete.• Be sure also to refer to the documentation that comes withthe external equipment for its proper connectionprocedures.Connecting HeadphonesConnect commercially available headphones to thedigital piano’s PHONES jacks. This cuts off the built-in speakers, which means you can practice even lateat night without disturbing others. To protect yourhearing, make sure that you do not set the volumelevel too high when using headphones.[Left Side Panel]Connecting to a PEDAL JackDepending on the type of operation you want thepedal (SP-3) to perform, connect the pedal’s cable tothe digital piano’s PEDAL DAMPER jack or PEDALSOFT/SOSTENUTO jack. If you want to use bothjacks at the same time, you need to purchase anotheroptionally available pedal.See “Using the Piano’s Pedals” on page E-8 forinformation about using a pedal.[Back Panel]PEDAL connectorYou can connect the optionally available Pedal Unit(SP-30) to the PEDAL connector. You can then use thepedals for expression that is similar to that availableon an acoustic piano.[Bottom]Accessories and OptionsUse only the accessories and options specified for thisdigital piano. Use of non-authorized items creates thedanger of fire, electric shock, and personal injury.HeadphonesPHONES jacksSP-3PEDAL jacksPEDAL connector