Casio Privia PX-5S User Manual

Also see for Privia PX-5S: User guide Other Quick start guide User manual

Casio Privia PX-5S User Manual Manual pdf 32 page image

E-30Recording and Playing Back Phrases (Tutorial)2. Edit the song as desired.• To configure mixer settings, select “Song Mixer”.• The parameters of the mixer settings are described in the table below.Display Text Description SettingBank Select MSBBank select MSB. Specifies the bank select MSB number.• To specify a tone on the song mixer screen, specify “Bank Select MSB” and“Program Change” numbers, referring to the “Tone List” at the back of thismanual.0 - 127Program Change Program change. Specifies the program change number. For details, see “BankSelect MSB”, above. 0 - 127Channel Specifies the output channel number. 1 - 16Volume Volume. 0 - 127Pan Panning. Adjusts the left-right position of sound in the stereo field. –64 - 0 - +63Coarse Tune Coarse tune. Shifts the pitch of notes by semitone units. –24 - 0 - +24Fine Tune Fine tune. Shifts the pitch of notes by cent units. –99 - 0 - +99Bend Range Bend range. Specifies (in semitone units) the maximum change in pitch when the1 (BENDER) wheel is rotated. 0 - 24Chorus Send Chorus send. Specifies how the chorus effect is applied. 0 - 127Delay Send Delay send. Specifies how the delay effect is applied. 0 - 127Reverb Send Reverb send. Specifies how the reverb effect is applied. 0 - 127Generator Out Internal send (Gen Out) on/off. Specifies whether or not to send informationabout each part to the Digital Piano’s internal sound source. Off, OnUSB Out USB output (USB Out) on/off. Specifies whether or not MIDI send of theinformation of each part is performed from et (USB). Off, OnMIDI Out MIDI output (MIDI Out) on/off. Specifies whether or not MIDI send of theinformation of each part is performed from fl (MIDI OUT/THRU). Off, On1. Perform steps 1 and 2 of the procedure under“Mixer Settings When Playing Back a Song”(page E-29) to select “Tempo”.2. Adjust the tempo setting.1. Perform steps 1 and 2 of the procedure under“Mixer Settings When Playing Back a Song”(page E-29) to select the setting you want.• To clear a track, select “Track Clear”. Next, on thescreen that appears, use the dk minus (–) and plus (+)buttons to select the track you want to clear.• To initialize the song, select “Song Initialize”.2. Press the em (ENTER) button.• This will display a confirmation message (“SURE?”).• If you want to cancel the operation, press the eo (NO)or dr (EXIT) button.3. Press the eo (YES) button.• “Complete!” appears on the display after the processis complete.To change the tempo whenplaying back a songTo clear a track or initialize asong