E-38Other Useful Functions (Tutorial)This item is for adjusting how much the sound volumeand timbre changes, and how it changes in accordancewith keyboard pressure.1. Press the bm (SYS SETTING) button.2. Use the ds (u), dt (w), ek (q), and el(i) buttons to select “General”.3. Press the em (ENTER) button.4. Use the ds (u), dt (w), ek (q), and el(i) buttons to select a setting item.Setting Item5. Change the setting.6. After settings are the way you want, press thebm (SYS SETTING) button to exit the settingscreen.Recalling a stage setup causes Digital Piano parametersto be overwritten with the content of the setup. If youcreate a stage setup filter, the parameters assigned tothe filter are not overwritten to be recall of a stagesetup, so they retain their current settings.1. Press the bm (SYS SETTING) button.2. Use the ds (u), dt (w), ek (q), and el(i) buttons to select “General”.3. Press the em (ENTER) button.4. Use the ds (u), dt (w), ek (q), and el(i) buttons to select “Stage Set Filter”.5. Press the em (ENTER) button.6. Use the dt (w) button to select a settingitem, and then press the em (ENTER) button.• Use the eo minus (–) and plus (+) buttons to selecteither “Off” (to allow overwriting of the setting item)or “On” (to disable overwriting of the setting item).Setting ItemAdjusting the TouchSensitivityDisplay Text Description SettingsTouchTouch. Specifies touchsensitivity when the keyboard isplayed.Off: Notes sound at a fixedvolume level regardless ofkeyboard pressure.Light: High-volume notes areeasily produced even with lightkeyboard pressure.NormalHeavy: Normal sound isproduced when relatively heavypressure is applied.Refer tothe cell tothe left.Touch OffVeloTouch off velocity. Specifies thevolume level at which the abovetouch setting values become off.1 - 127Stage Setup FilterDisplay Text Description SettingsTempoTempo. When “On” is selected,recall of tempo parameters(page E-34) is disabled.Off, OnArpeggioArpeggio. When “On” isselected, recall of arpeggioparameters (page E-34) isdisabled.Off, OnPhrasePhrase. When “On” is selected,recall of phrase parameters(page E-34) is disabled.Off, OnHammerResponseHammer response. When “On”is selected, recall of hammerresponse parameters (page E-34)is disabled.Off, OnChorusSystem chorus. When “On” isselected, recall of system chorusparameters (page E-23) isdisabled.Off, OnDelaySystem delay. When “On” isselected, recall of system delayparameters (page E-23) isdisabled.Off, On