10E1. Remove the printercover and open theplaten arm (receiptside).2. Remove the batterycompartment cover.1. Load the memory protection batteris and Paper rollsLoad the two memory protection batteries3. Note the (+) and (–) markings in the batterycompartment. Load a set of two new alkalinebatteries so that their positive (+) and nega-tive (–) ends are facing as indicated by themarkings.Important!These batteries protect information stored in your cash register's memory when there is a powerfailure or when you unplug the cash register. Be sure to install these batteries.4. Replace the battery compartment cover. 5. Close the platen arm and replace the printer cover.WARNING!• Never try to recharge the batteries supplied with the unit.• Do not expose batteries to direct heat, let them become shorted or try to take them apart.Keep batteries out of the reach of small children. If your child should swallow a battery, consult aphysician immediately.Getting StartedThis chapter shows how to setup the cash register and get it ready to operate. Please read this chapter evenif you have used a cash register before.printer coverplaten armbattery compartment coverNo battery is includedin the accessories.
