E-48Advanced programmings and registrationsAdvanced registrationsEnabling clerk assignmentBy assigning a clerk, clerk number or name will be printed on receipts. The fol-lowing operation enables the register to use the clerk assignment.Step Operation1 Turn the Mode switch to PGM position. The display showsprogramming top menu.2 Using ? and > keys, select [System Setting] and pressF key. [System Setting] is the last column on the pro-gramming top menu and is not shown on the first screen.Keep pressing > key until it appears on the screen.3 Enter 3 from ten key pad then press o key. Thisoperation sets the register in program mode.3o4 Enter 2722 from ten key pad and press okey. Number 2722 is the program code for clerk assign-ment setting.2722o5 Enter 4 and eight zeros from the ten key pad then pressF key. Number 400000000 is the set code to enableclerk assignment.If you wish to disable the clerk assignment feature later on,perform these steps and enter nine zeros in this step.400000000F6 Press o key to complete the setting. oYou can also program for enabling clerk operations by detail setting program. Please see pageE-75 “Set code 27”.