— 34 —[ 4 ] RAM READ ONLY test[Function]RAM READ ONLY test is performed.Perform the WRITE test (n011) right before start of this test.System area test for COMMON is not performed.[Operation]Operation : n 1 1 1 SUBTOTALn : 0 = One time check (can be omitted)not 0 = Continuous check ( Press the “C” key or turn off the power by rotating the key toend the test.)[Pop-up display]A counter is displayed for Pop-up display.Address of an error is printed if the test ended with an error.n=0 1 2 3[Main display]n D I A G 0 1 1 10 0 nn=0 1 2 3[Print]The result for all area test for RAM is printed as follows.* Refer to RAM WRITE/READ test when NG is printed.R A M 1 1 1R A M R D O KE N D 1 1 1[ 5 ] CF-CARD WRITE/READ test[Function]This test will check the write/read test (connection test) for CF-CARD.Perform the CF-CARD clear test, before start of this test.Note that this test does not ensure the data inside the CF-CARD as well as its performance.[Operation]Operation : 0 n 0 1 3 SUBTOTALn : 0 = One time check( can be omitted)not 0 = Continuous check (To stop the test, press “C” key or turn off the power by rotatingthe key.)[PRINT]NG and the address are printed if WRITE cannot be donenormally.C F - C A R D 1 3C F W R O KE N D 1 3