103 EIn case of power failureIf the power supply to the cash register is cut by a power failure or any other reason, simply wait forpower to be restored. The details of any ongoing transaction as well as all sales data in memory areprotected by the memory backup batteries. (This is the reason to install the batteries.)• Power failure during a registrationThe subtotal for items registered up to the power failure is retained in memory. You will be able to continuewith the registration when power is restored.• Power failure during printing a read / reset reportThe data already printed before the power failure is retained in memory. You will be able to issue a report whenpower is restored.• Power failure during printing of a receipt / journalPrinting will resume after power is restored. A line that was being printed when the power failure occurred isprinted in full.• OtherThe power failure symbol is printed and any item that was being printed when the power failure occurred isreprinted in full.Important!Once receipt / journal printing or printing of a report starts, it can be stopped only by interruption ofpower to the cash register.TroubleshootingWhen the L sign appears on the displayAbout the low battery indicator…The following shows the low battery indicator.If this indicator appears when you switch the cash register on, it can mean oneof three things:•No memory backup batteries are loaded in the cash register.•The power of the batteries loaded in the unit is below a certain level.•The batteries loaded in the unit are dead.Important!Whenever the low battery indicator appears on the display, load a set of two new batteries as soonas possible. If there is a power failure or you unplug the cash register when this indicator appears,you will lose all of your sales data and settings.BE SURE TO KEEP THE POWER CORD OF THE CASH REGISTERPLUGGED IN WHENEVER YOU REPLACE THE BATTERIES.TroubleshootingINITllllllllllRPTAMOUNTT1 T2 T3 T4 TOTAL CHANGE
