11Getting StartedEStep 1Remove the printer cover.Step 2Open the platen arm.Step 3Ensuring the paper is beingfed from the bottom of theroll, lower the roll into thespace behind the printer.CompleteReplace the printer cover,passing the leading end ofthe paper through thecutter slot. Tear off theexcess paper.Step 5Close the platen armslowly until it lockssteadily.Step 4Put the leading end of thepaper over the printer.To install receipt paperImportant!Take away the head protection sheet from the printer and close the platen arm.Caution! (in handling the thermal paper)• Never touch the printer head and the platen.• Unpack the thermal paper just before your use.• Avoid heat/direct sunlight.• Avoid dusty and humid places for storage.• Do not scratch the paper.• Do not keep the printed paper under the following circumstances:High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.2. Install receipt / journal paper.Platen armPlatenPrinter
