3-7EXTERNAL PARTSREAR FENDER● Luggage box. ( 3-3)● Plug maintenance cover. ( 3-3)● Center cover. ( 3-3)● Rear carrier. ( 3-3)● Body cover. ( 3-3)● Taillight base. ( 3-4)● Remove the 2 washer bolts securing the fuel tanksupport stay.● Draw the rear part of the rear fender from the bracket inthe frame.● Loosen the rear cushion under bolt, remove the rear fender.•If removal is difficult, recheck each connection andtry removing again.● Install in the reverse order of removal.REAR WHEEL MED GUARD● Loosen the 2 flange bolts securing the EX muffler.● Loosen the flange bolt securing the air cleaner.● Loosen the flange bolt securing the inlet pipe.● Remove the rear wheel mud guard.● Install in the reverse order of removal.•Never perform the maintenance of the muffler rightafter stopping the vehicle because the muffler isextremely hot.UNDER COVER● Remove the floor side cover. ( 3-4)● Remove the engine hanger side cover. ( 3-5)● Loosen the 2 R/L setting screws securing the frame.● Remove the under cover.● Install in the reverse order of removal.FLANGE BOLTREAR WHEEL MUD GUARDUNDER COVERSETTING SCREWWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLTWASHER BOLT