DAHAO A88 Owner's Manual

Contents

Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Chapter 1 General Descriptions
The difference between A88 and C88
Technical Specifications
Chapter 2 Operation Instruction
Instruction of Control Panel
Instruction of the Main Screen
Notes on Menu State
Flow Chart of Embroidery
Normal Embroidery, Returning and Patching
Operation Bar and Turn Shaft Button
Patching Switch
Chapter 3 Disk Management
Select One or Several Designs
Design Preview
Design input
Design Output
Folder Operation
Deleting Objects in Disk (Including Design Files and Folders)
Creating a New Folder in the Current Folder
Chapter 4 Common Parameters and Color-changing Order
Setting "X&Y Scales
Setting of "Rotate
Rep. Prior
Setting of Color-changing order
Setting of the color-changing order
Setting Needle Color
Interchanging of Needle Colors
Chapter 5 Setting General Parameters
Setting Procedure for General Parameters
Introduction of Some Functions of General Parameters
Store Manual Color-changing
Forbidding Design Output
Chapter 6 Memory Design Management
Selecting a Design for Embroidery
Sorting the designs
Copy the Memory Design
Deleting the memory design
Setting Normal Parameters
Compile Paras Design
Edit Packed Design
Programming Combined designs
Satin Width Adjustment
Shift the Frame to Make a New Design
Make True Design Range
Divide the Design
Combine Two Designs
Clear all Memory Designs
Chapter 7 Memory Design Edit
Pattern Edits Operation
Document and View Operation
Convert Needle Code
Delete Needle
Chapter 8 Letter Design
Enter Embroidery Letter Bunch and Basic Parameter
Adjust Letter Pattern
Save Letter Pattern
Chapter 9 Assistant Operation Functions
Move Frame to Design's Start Point
Saving the Start Point
Move Frame to Let Design Be Central
Show the Range of Embroidery Design
Embroider along the Design Range
Embroider one Cross
Embroider One Line
Embroider the Design's Outline
Set the Offset Point
Let Needle Down
Clearing X and Y Displacements
Operation on AFC, Sequin and Coiling Devices
Float forward given stitches
Float forward next color
Setting Course
Chapter 10 Other Functions
Show Machine Statistics Information
Frame Restoring after Power Off
Set the Frame Software Range
Chinese/English/Turkish/Spanish Conversion
Machine Management Access
Machine Administrator Relieve Lock
Parameter
Factory Customer Change the Password
Validation of factory ID
The Software Information of the Machine
The Adjustment of Machine
Touch Screen Adjustment
Chapter 11 Sequin Embroidery
Operating Sequin Embroidery
Steps of Setting Sequin Parameters
Sequin Mending
Chapter 12 Directions on Coiling, Taping and Zigzag Embroidery
Main Technical Details
Relative Operations of Special Embroidery
M Axis Operation of Taping Embroidery
Operations of Clamp Foot
On Debugging Special Embroidery
Steps on Special Embroidery
Definition Charts of DIP Switches of E874 Boards
Appendix Ⅰ Parameter Setting List
Appendix Ⅱ Directions on USB operations
Appendix Ⅲ Error Information

DAHAO A88 Owner's Manual Manual pdf 121 page image

Chapter 9 Assistant Operation FunctionsBECS-A88/C88 computerized embroidery machine owner’s manual 113Click in the main screen to enter the assistant operation screen.Click “Move frame along the design range”.The system asks the user to confirm.Click to confirm and the system will move the frame along the designboundary. Click to cancel the operation.9-6 Embroider along the Design RangeThe system is able to calculate the design’s peripheral data for embroidery. Thisfunction should be used in embroidery preparation status.Click in the main screen to enter the assistant operation screen.Click “Embroider along the design range”.The system asks the user to confirm.

/ 189

This manual is suitable for:

A88 C88

manualsdatabase

Your AI-powered manual search engine