Chapter 1 General DescriptionsBECS-A88/C88 computerized embroidery machine owner’s manual 1Chapter 1 General DescriptionsThanks for using the Computerized Embroidery Control System of DAHAOCompany. It is appreciated that you do read this manual carefully in order tooperate the machine correctly and effectively. Besides, you should keep thismanual for future use.1-1 Warnings and CautionsNoticeDangerDuring the operation, do not try to open the machine box. The highvoltage contained in some parts can be deadliness. Rotating parts maycause serious injury.ForbiddingDon't expose the machine to humidity gas, poisonous gas, water, anddust.ForbiddingDon’t restore or operate in vibration, which may cause trouble to themachine.Notice Please abide all the warnings and safety requirements to save life.NoticeLCD belongs to fragile goods. Do not use hard materials to click on thescreen.NoticeBefore plugging in, please make sure if the lamp of floppy disk driver ison, don't move out the floppy disk.NoticeWe will add appendix if necessary, if there is any difference between themanual and appendix, subject to the appendix.In TransportationNotice Don't hold the cable when moving.Notice Please abide all the warnings and safety requirements to save life.ForceOverloading may cause serious loss. Please load according to theinstruction on the box.Installation
