DAITEM SH195AX Installation Manual

Also see for SH195AX: User guide

Contents

DAITEM SH195AX Installation Manual Manual pdf 11 page image

GB1014. Parameter-settingIMPORTANT: detector parameter-setting must only be performed withthe detector cover open.4.1 Setting the parameters of detector SH195AXFunctiondescriptionParametern°Parametervalue CharacteristicsDetectionsensitivity 11 Beam crossed a first time: not recommended2 Beam crossed a second time (factoryconfiguration): recommendedTest LEDlighting (1) 2 1 Deactivated (factory configuration)2 ActivatedAlarm level 41 Intrusion (factory configuration)2 Prealarm3 Deterrence4 WarningImage sequenceon request (2) 6 1 Authorisation activated (factory configuration)2 Authorisation deactivatedAbove freezingtemperature 7 1 Detection deactivated (factory configuration)2 Detection activated4.2 Setting the parameters of detector SH196AXFunctiondescriptionParametern°Parametervalue CharacteristicsTest LEDlighting (1) 2 1 Deactivated (factory configuration)2 ActivatedSensitivity levelsetting 31 Level 1: standard sensitivity(factory configuration)2 Level 2: average sensitivity3 Level 3: high sensitivity4 Level 4: maximum sensitivityAlarm level 41 Intrusion (factory configuration)2 Prealarm3 Deterrence4 WarningImage sequenceon request (2) 6 1 Authorisation activated (factory configuration)2 Authorisation deactivatedAbove freezingtemperature 7 1 Detection deactivated (factory configuration)2 Detection activated(1) The infrared detector has a test mode for testing the detection zone:• press the test button and the detector switches to test mode for 90 seconds,• each detection is indicated by the LED lighting up.(2) Image transmission request via Daitem user Portal (when no intrusion has occurred).