DARAY SL200 Series Installation And Operating Manual

Contents

DARAY SL200 Series Installation And Operating Manual Manual pdf 10 page image

105. LAMP REPLACEMENTTURN OFF the mains power.Remove the diffuser by undoing the 4 crosshead screws.Remove the 'blue' filter. Note: take care when handling the blue borosilicate glass filter.It is fragile and costly to replace.Gently move the lamp shield to one sideThe shield can be refitted, if it comes out of itsretaining groove, by squeezing the sides of the wireholder.Remove the lamp by moving it from side to side andpulling it gently out of its holder.CAUTION: the lamp may be very hot!Holding a replacement lamp by its plastic packaging, insert thewire connectors into the lamp holder.CAUTION: use only LB4059 replacement lamps from DARAY.These are special lamps and the use of any other type wouldseriously impair the performance of your light.CAUTION: do not touch the lamp quartz envelope with yourfingers.Refit the lamp shield, glass filter and the diffuser.CAUTION: Do not overtighten the screws that secure the blue borosilicate glass filter.This can cause the material to crack and it is costly to replace.