DARAY SL720 Installation Manual

Also see for SL720: Installation manual

DARAY SL720 Installation Manual Manual pdf 16 page image

Page 15 of 293.1.6 Suspension arm InstallationThe Suspension arm uses an internal rotary system which allows the joint to have 360 degreerotation. To install the arm you will need to first remove the screws from each side of the armjoint spigot.Connect the power cables and then push the suspension arm’sspigot up into the rotation arm (ensuring you do not catch thewires), then re-insert the screws to secure it in place.Warning, without the lighthead attached, the suspensionarm will spring upwards rapidly. Keep control of the armat all times and avoid any obstructions in its path.3.1.7 Hook arm and lighthead InstallationThe hook arm and lighthead section needs to be attached to the suspension arm system.Remove all screws within the joint including the grub screw.Warning, please observe the cable polarities and ensure that theymatch, incorrectly wiring the device will cause damage to the systemRemove allscrewsConnectMolex