Page 34 of 435. MaintenanceThe proposed maintenance is only a suggestion. Depending on the use of the product and theoperating environment, this may need to be revised more often. Daray would stronglyrecommend against “quick fixes” with tape, etc. If you cannot resolve a problem then pleasecontact our helpline on 0800 878 9864 or email support@daray.co.uk5.1 Maintenance scheduleWeekly checksshould include:-Range of movement testing, it should be light and easy to movethroughout the rangeNo visible signs of excessive wear.Monthly checks toinclude:- Check the downtube and thumb screws for wear and report as necessarySix monthlychecks toinclude:-Check all electrical connections are sound and that there is no visiblecable wear.All fixings to be checked and be of sound construction.Check optional battery back-ups for deformities and overheating5.2 Safety Precautions For all cleaning work, power off the equipment and where possible completely poweroff any mains connection, only minimal cleaning fluids should be used. Please do not look directly into the light source when illuminated. If the equipment is dented or scratched this should not impact the usability of ourlights however we advise that you do not attempt to cover over any damage as thiswill impact upon the effectiveness of any cleaning you do. Simply use an alcoholbased cleaning spray when cleaning and pay special attention to any damaged areas.(When applicable) If there is damage to the power cable or if exposed wire is visibleDO NOT USEThe SL730 is to be disassembled and maintained only by a qualifiedtechnician.