EtherSeries DNP- 3 Gateway User’s GuideMain Menu Option 6.DNP Serial ConfigurationSelecting (6) from the Main Menu willresult in the following screen:DNP SERIAL CONFIGURATION:Port 1 DNP Address Low: 256 (0100 hex)Port 1 DNP Address High: 65527 (FFF7 hex)Port 2 DNP Address Low: 256 (0100 hex)Port 2 DNP Address High: 65527 (FFF7 hex)SET DNP SERIAL CONFIGURATION:1 Port 1 DNP Address Low [0 - 65534]2 Port 1 DNP Address High [0 - 65534]3 Port 2 DNP Address Low [0 - 65534]4 Port 2 DNP Address High [0 - 65534]0 -- Return to previous menuEXAMPLE: To set the Port 1 low address limit to 200=> 1 200Enter Command =>Use this screen to configure DNP serial configuration values.For each of the ports (1 or 2) configure the following…RTU DNP Address LowConfigures the lowest address of an RTU on this port.RTU DNP Address HighConfigures the highest address range of an RTU on this port. Ifthe ranges of port one and port two overlap, addresses in theoverlap will be sent to port one..20
