DCS PHFS-DW-SS, PHFS-DW-BK, PHFS-DWWT, PHFS-DW-BL, PHFS-DW-GN, PHFS-DW-BZ Use And Care Manual
                                                  | |
Assembly Instructions8STEP 6To join the post assembly with base cabinetyou will need to place the base upright on thefloor and lift the post assembly and place itonto the cabinet with the burner panel facingthe same side as the door. Tighten the (8)nuts and bolts at the bottom of post assemblyto the top of the cabinet base. Replace valvepanel utilizing step 2 in the reverse order.HARDWARE USED1) P/N 15003-05 1/4-20 Bolts (8)2) P/N 15005-08 Washers Nylon (8)(Painted Models Only)3) P/N 15021-09 1/4-20 Keps Nuts (8)STEP 7Hold the reducer fitting with a 15/16” wrenchand tighten the hose / regulator assembly ontothe reducer fitting. (See page 20 items 7 & 8)STEP 8Do not attach the reflector shield until allleak testing has been completed.This unit istippable once the post assembly is fastened tothe cabinet base and could damage or misshapethe reflector shield prior to use.FIG.06FIG.05321HIGHPRESSURE HOSE |
Related manuals for DCS PH3 PHFS-DW-BK
manualsdatabase
Your AI-powered manual search engine