DCS RGV2-488 User Manual

DCS RGV2-488 User Manual Manual pdf 32 page image

30COOKTOP USEUsing the cooktop burners1 Identify the knob of the burner you wantto use.3 When the burner has lit, turn the knobto any setting between HI (high) andSIM (simmer).● The clicking should stop as soon as theburner has lit.● If the burner doesn’t light, and/or theclicking doesn’t stop, or the flamesare not blue and well-defined, turn theknob clockwise back to OFF and see‘Troubleshooting’ for advice.4 When you have finished cooking, turnthe knob clockwise back to OFF.● The knob will release and the burner andhalo will go out.● If you are using LP gas, there may bea slight ‘extinction pop’ or flash at theflame spreader a few seconds afterthe burner has been turned off. This isnormal for LP gas.2 Push the knob in and turn itcounterclockwise to LITE.● Make sure you stop at LITE before turningthe knob to any flame setting.● The halo will glow orange.● You will start hearing a clickingsound. If there is no clicking, turn theknob clockwise back to OFF and see‘Troubleshooting’ for advice.Halo(Orange)Halo(Unlit)Halo(Orange)