DDDrop EVO TWIN Installation And User Manual
                     | |
6EN 1905243 Installation of the deviceIn this chapter the installation of the dddrop EVO Twin printers is described. These steps have to bemade before use. The first step is placing the machine on a stable support, removing the transportmaterials followed by the power connection to the mains. After completing these steps, the printercan be used.WARNINGThe machine needs to be lifted and moved by two persons using the grips on both sides of themachine in order to minimize the chance of pinching or dropping of the device. Place the machineon a stable support with a loading capacity of at least 50kg.WARNINGThe machine is to be used in well ventilated areas only. Fumes that can occur during the printingprocess are material dependent and, especially in case of insufficient ventilation, have to beextracted.3.1 Placing the deviceThe dddrop printer is supplied with an USB stick, two filament holders, container, internet cable anda power cord. Accessories like Quick Starting kits can be ordered additionally enabling the user tostart right away.The machine needs to be placed on a stable support with a loading capacity of at least 50kg in a wellventilated area, free of weather influences, limited humidity and at room temperature.WARNINGThe machine is shipped with transport materials which have to be removed before the machine isconnected to the power and put to use. Failure to remove the transport materials may causedamage to machine components beyond repair. |
Related manuals for DDDrop EVO TWIN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine