DURKOPP ADLER 275 Series Operating Instructions Manual

Also see for 275 Series: Spare parts Spare parts Instruction manual Additional instructions

Contents

DURKOPP ADLER 275 Series Operating Instructions Manual Manual pdf 56 page image

Programming54 Operating Instructions 275 - 02.0 - 08/20195.1.2 Sewing with multiple widthsTo sew with multiple widths:1. Deactivate all sequence buttons that are not required:To do this, press the corresponding sequence button and theActivation/deactivation button at the same time. The red LEDs above the deactivated buttons light up.If the button for the desired sequence is deactivated (red LED is lit):2. Activate all sequence buttons that are not required:To do this, press the corresponding sequence button and theActivation/deactivation button at the same time. The red LED goes out.The button is activated.3. Press the button for the desired sequence. The green LED above the button lights up.The display shows the upper transport value for thissequence.InformationThe upper transport length can be adjusted using the Plus/Minusbuttons if the sewing results are not satisfactory.The changed setting of the upper transport length is stored imme-diately.