Näheinrichtungen381/382Sewing equipmentAusgabeEdition11.97Blatt 2PageFortsetzung Blatt 3Continued pageE7 7,9 E7 10,3E7 11,9E7 6,4E7 4,8

Nadelstangenkulisse

Spannungsplatte

Schaltschloss

Greiferbock

Stichlänge

Puller

DURKOPP ADLER 381 Spare Parts

Delivery scope

Stand installation 3.1 Installing stand parts

Setting working height

Fitting the keys

Fitting the pedal

Fitting the control panel

Electrical connection 6.1 General

Connection bushes on control box

Establishing cable connections

Equipotential bonding

Checking the direction of rotation

Checking the positioning

Pneumatic connection

Oil lubrication

Sewing test

Product Description

Subclasses

Technical Data

Operation 6.1 Threading the Needle Thread

Setting the Needle Thread Tension

Setting the Tension Regulator

Winding the Underthread

Inserting the Underthread Bobbin

Setting the Underthread Tension

Inserting and Changing Needles

Lifting the Sewing Feet

Setting the Sewing Foot Pressure

Stitch Length on Sewing Machines without Automatic Bartacking

Stitch Length on Sewing Machines with Automatic Bartacking

Roller Top Feed

Controls and Control Panel 7.1 General

Keys on the Control Panel

Changing the Parameter Values

Operator Level" Parameter List

Key Bank on the Machine Arm

Sewing

oil lubrication

Gauge set

Position of the integrated adjusting disk in relation to the arm shaft

Position of the lower toothed belt pulley

2. Distance between the needle bar and the cloth presser bar

Position of the needle in the stitch hole

synchronism of the needle and of the lower feed

Feed dog height

Aligning the feed dog

Position of the lifting eccentric

8. Upper puller feed

Distance between the puller and the needle

Puller lifting stroke

Puller pressure

Toothed belt tension of the upper puller feed

8.7 Replacing the puller

Needle bar height

Height of the cloth presser bar

Foot lift, mechanical

Foot lift, electropneumatic (autom. sewing foot lift)

Sewing foot power

Releasing the upper thread tension

Thread tightening spring

Bobbin winder

Loop stroke and distance of the hook tip to the needle

Bobbin case lifter

Adjusting the control cam

Adjusting the thread cutter magnet

Timing the knife movement

Position of the hook shaped knife in relation to the counter knife

Cutting pressure

Thread clamp pressure

Transmission rods for the action of the hook shaped knife

Removing the needle bar crank

Removing a needle bar from the crank

Stripping a needle bar

Fitting the needle bars into the needle bar crank

Fitting the needle bar crank

Changing the sewing equipment

Changing the toothed belt

18. Lubrication

Oil circulation

Hook-drive lubrication

Sewing motors

Maintenance

Thread wiper


Contents Table Of Contents Nadelstangenkulisse Spannungsplatte Schaltschloss Greiferbock Stichlänge Puller	Näheinrichtungen381/382Sewing equipmentAusgabeEdition11.97Blatt 2PageFortsetzung Blatt 3Continued pageE7 7,9 E7 10,3E7 11,9E7 6,4E7 4,8 Previous Next / 69