DURKOPP ADLER 512-211-01 Service Instructions Manual

Also see for 512-211-01: Service instructions

Contents

Settings via softwareService Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 51Editing a sewing pattern / contour test: Value 4Fig. 30: Editing a sewing pattern1. Press the +/- Function buttons to set value 4.2. Press the Selection button. The Program display shows a 1 for the first stitch; the Function dis-play shows the value for the X-axis; the X-axis LED illuminates.3. Press the +/- Function buttons to set the coordinates of the 1st stitchfor the X-axis.4. Press the Selection button. The Y-axis LED illuminates; the Function display shows the valuefor the Y-axis.5. Press the +/- Function buttons to set the coordinates of the 1st stitchfor the Y-axis.6. Press the +/- Program buttons to select the next stitch.7. Repeat steps 3 to 5 for all additional stitches.8. Press the Ready button to save the edited sewing pattern.9. Press the Reset button. The LED in the button switches off.10. Press the USB button. The LED in the button switches off.11.23Error messagesIf an error occurs, the Error LED illuminates.Error Description Possible cause RemedyE 8 Error table data Unable to read the tabledataSave the table dataagain.E 1 0 Error sewingpattern numberThe selected sewing pat-tern is not saved in ROM oris set to non-readable. Thesewing pattern is "0"Press the Reset button toconfirm the sewing pat-tern number.E 3 0 Error needlebar position topThe needle bar is not at thetop positionCheck the connections.Turn the needle bar tothe top dead center posi-tion.