Safety10 Operating Instructions 512/532 - 05.0 - 04/2018All the warnings and safety signs on the machine must always bein legible condition. Do not remove!Missing or damaged warnings and safety signs must be replacedimmediately.Requirementsto be met bythe personnelOnly qualified specialists may:• set up the machine / put the machine in operation• perform maintenance work and repairs• perform work on electrical equipmentOnly authorized persons may work on the machine and must firsthave understood these instructions.Operation Check the machine during operating for any externally visibledamage. Stop working if you notice any changes to the machine.Report any changes to your supervisor. Do not use a damagedmachine any further.Safetyequipment Safety equipment should not be removed or deactivated. If it isessential to remove or deactivate safety equipment for a repairoperation, it must be assembled and put back into operationimmediately afterward.2.2 Signal words and symbols used in warningsWarnings in the text are distinguished by color bars. The colorscheme is based on the severity of the danger. Signal wordsindicate the severity of the danger.Signal words Signal words and the hazard they describe:Signal word MeaningDANGER (with hazard symbol)If ignored, fatal or serious injury will resultWARNING (with hazard symbol)If ignored, fatal or serious injury can result
