Programming38 Operating Instructions 512/532 - 05.0 - 04/20184.14 Saving seam appearancesStandard seam appearances can be stored under the seam ap-pearance buttons P1 to P5, with a total of 50 memory locationsavailable.The memory locations are called up via the +/– Function buttons,the memory locations up to number 25 can also be called up usingsingle seam appearance buttons and combinations of these.Sewing appearance memory button combinations4.14.1 Assigning the memory buttonsPrerequisite:• Machine is in programming mode, Ready button LED is off.To assign the memory buttons:1. Press the Memory button and button P2 in quick succession.2. Press the +/– Program buttons to select a memory location.3. Press the Ready button to confirm the memory location.4. Select a seam appearance ( S. 31).5. Scale the axes ( S. 31).6. Set the speed ( S. 34).7. Relocating the sewing appearance position:MemorynumberButtoncombi-nationMemorynumberButtoncombi-nationMemorynumberButtoncombinationMemorynumberButtoncombinationP1 P1 P8 P1 + P4 P15 P4 + P5 P22 P2 + P3 + P4P2 P2 P9 P1 + P5 P16 P1 + P2 + P3 P23 P2 + P3 + P5P3 P3 P10 P2 + P3 P17 P1 + P2 + P4 P24 P2 + P4 + P5P4 P4 P11 P2 + P4 P18 P1 + P2 + P5 P25 P3 + P4 + P5P5 P5 P12 P2 + P5 P19 P1 + P3 + P4P6 P1 + P2 P13 P3 + P4 P20 P1 + P3 + P5P7 P1 + P3 P14 P3 + P5 P21 P1 + P4 + P5
