Settings via software (sewing automat)Instruction manual 550-532 - 00.0 - 07/2015 557.17 Editing parameters in memory7.17.1 Editing parameters at the M1 levelPrerequisite:• Machine is in programming mode, Ready key LED is off.1. Press and hold the Memory key for 3 s. The controller beeps once, the key LED lights up.The Program display shows the parameter number, theFunction display shows the parameter values.2. Press the +/- Program keys to select a different parameter.3. Press the Ready key to confirm the parameter. The key LED illuminates.4. Press the +/- Function keys to change values.5. Press the Reset key to return a changed value to the originalvalue.6. Press the Ready key to save a change. The key LED goes out.7. Press the Memory key. The key LED goes out.7.17.2 Editing parameters at the M2 levelPrerequisite:• Machine is in programming mode, Ready key LED is off.1. Press and hold the Memory key for 6 s. The controller beeps twice, the key LED lights up.The Program display shows the parameter number, theFunction display shows the values.2. Press the +/- Program keys to select a different parameter.3. Press the Ready key to confirm the parameter. The key LED illuminates.4. Press the +/- Function keys to change values.
