Sewing processInstruction manual 550-532 - 00.0 - 07/2015 739 Sewing processPrerequisite:• Machine is in sewing mode, Ready key LED illuminates.• Needle is fitted.• Needle thread is threaded.• Seam pattern is selected.• Button feeder has been set up and tested.WARNINGRisk of injury from the transfer arm and movingparts!Hold the sewing material in place with extremecaution, paying particular attention to the movingtransfer arm.Sewing process Operation / ExplanationStarting situationbefore sewingPedal is in the rest position. Sewing automat isat a standstill. Needle raised, clamp raised.The Ready key LED illuminates.Button feeder is on, buttons are transportedand separated.Sewing • Insert the sewing material.• Press the pedal forwards to the 1st position.The clamp lowers.• Release the pedal.The clamp raises.• Position the sewing material.• Briefly press the pedal fully forwards.The sewing automat sews at the configuredspeed.The button feeder transfers a button.Interrupting the sewingprocess in the middleof the sewing cyclePress the Reset key or press the pedalbackwards.The sewing automat stops. The clamps remainlowered.Continuing the sewingprocess in the middleof the sewing cyclePress the pedal briefly forwards all the way orpress the Reset key.
