DURKOPP ADLER 911-211-10 Operating Instructions Manual

ProgrammingOperating Instructions 911-211-10 - 00.0 - 10/2020 61Marking lampsUp to 4 marking lamps for easier alignment of the sewing material can becontrolled (the additional equipment must be activated)Reversal modeThe following options can be set:• Not activated: The needle remains at the Stop position• After the entire contour: After completing all seams in the contour,the needle is reversed to the value specified in the machine parameters• After each seam (Def.): The needle is reversed after every seamNeedle cooling(On / Off)Activates/deactivates the needle cooling.Adjust sewing speed(min. = 10… max. = 200; Def. = 100%)The sewing speed is adjusted by the specified percent value.PP2 - Load modeSymbol MeaningLoad modeThe following options can be set:• Mode 1 (Def.)The clamp is opened in the loading position. The clamp is closed when thepedal is pressed. Pressing the pedal again starts the sewing of the seam.• Mode 2The clamp is opened in the loading position. Pressing the pedal closes theleft part of the two-piece clamp for angle mounting. Pressing the pedalagain closes the right part. Another press of the pedal starts the sewing ofthe seam.• Mode 3The clamp is opened in the loading position. Pressing the pedal closes theright part of the two-piece clamp for angle mounting. Pressing the pedalagain closes the left part. Another press of the pedal starts the sewing ofthe seam.• Mode 4Quick-start mode:The clamp is opened in the loading position. The clamp is closed, and thesewing of the seam is started when the pedal is pressed. With thealternating clamp, the seam is automatically started after insertion.This mode is only active when quick-start is activated in the machineparameters. The machine must be switched off and on in order to activatethe quick-start mode.• Mode 5The clamp remains closed in the loading position. Pressing the pedal againstarts the sewing of the seam.Loading position(On / Off)With the loading position activated the clamps move to the desired positionfor convenient insertion of the sewing material.Symbol Meaning