DVTEL CT-5320F Quick Installation Manual
Also see for ioimage CT-5320F: User and installation guide
                           | |
Contents
|
Document InformationviiCamera WarningsWarning:1. Only qualified trained personnel should service and repair thisequipment.2. Observe local codes and laws and ensure that installation andoperation are in accordance with fire, security and safetystandards.3. The unit’s cover is an essential part of the product. Do notopen or remove it. Operating the unit without the cover posesa risk of fire and shock hazards.4. Do not disassemble the unit or remove screws. There are nouser serviceable parts inside the unit.5. Operating the camera at voltage levels outside the specifiedrange may result in permanent damage to the unit and void theproduct warranty.6. The camera electronics and electronic interfaces are sensitiveto electrostatic discharge. Follow appropriate ESD procedureswhen handling the camera and during installation.7. Be sure not to expose the camera head to strong sunlight,which could cause the camera to overheat.8. This product must be connected to a Power over Ethernet IEEE802.af-compliant power source or a UL listed Class 2 powersupply rated 12-24 VDC or 24 VAC, minimum 13W or 0.54A.9. For PoE installations, we strongly recommend using STP cablingand an earth grounded end point to ensure proper ESDimmunity. For installations powered by AC or DC, a properlyearth grounded power source is strongly recommended. Anyother installation method may leave the camera at risk andvoid the warranty.10. If you use a power supply, make sure that the connectionmatches the positive and negative polarity on the unit, andprotect against static electricity, ground faults and powersurges. |
Related manuals for DVTEL ioimage CT-5320F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine