1919 - 2COOLING - EXHAUST - TANKThe heating radiatorhas no valve.The fluid circulation is permanently done in the heating radiator, this leading to the enginecooling.FILLINGOpen thepurging screw locatedon the waterpipe betweenengine and climatecontrol radiator.Fillup the circuit by the expansionvesselholeTightenthe purging screwsin the moment when the fluidis flowingin a continuos jet.Start the engine, maintaining it at2500 rot/min.Adjustthe fluid level in the expansionvessel, during about 4 minutes.Close the cap of the expansion vessel.PURGINGLet the engine run for 10 minutesat 2500 rot/min, until engine fan starting (necessaryperiod for automaticgas purge).Check if the fluidlevel in the expansion vesselis nearby the mark “Max”.Do not open the purging screws with the engine running.Retighten the expansion vessel cap with the warm engine.Filling - Purgingvnx.su
