Operating Your Dishwasher18 DishwasherThe DELAY FeatureTo set your dishwasher to start automatically at a later time:1. Press one of the wash cycle buttons or the rinsebutton:2. If you have selected NORMAL, you may press theSANI-RINSE button for maximum sanitization.3. Repeatedly press the DELAY button until the numberof hours you want to delay operation appears on thenumeric display. You can delay the start of yourdishwasher up to 12 hours.4. After you select the delay time, press START/STOP.5. Close the door. The dishwasher will start after theselected number of hours.To cancel the delay function, open the door and press CANCEL.Changing the Cycle After You StartYou can change the cycle and option selections after you start your dishwasher.To change the cycle:1. Open the door. The dishwasher stops operating.2. Press the CANCEL button twice.3. Press the button for the desired wash or rinse cycle(NORMAL, HEAVY, CRYSTAL, or RINSE).4. If you have selected NORMAL, you may press theSANI-RINSE button for maximum sanitization.5. Press the START/STOP button.6. Close the door.7. After a short pause, operation will resume.DELAYSTARTSTOPNORMAL HEAVY RINSECRYSTALSANITIZEDRINSE AIDDIAGNOSTICWASHINGRINSINGDRYINGCLEANFLOOR GUARDSTARTSTOP NORMAL HEAVY CRYSTAL RINSE DELAY SANIRINSE SECURECANCELCANCEL X 2NORMAL HEAVY RINSECRYSTALSTARTSTOP