Getting to Know Your Dishwasher8 DishwasherParts of the Control Panel Control Panel Indicator Lights: The lights that show the status of the dishwashing cycle and things thatmay require your attention (see page 20). Numeric Display: Displays the approximate number of minutes until the end of the cycle.If you are using the delay feature, it shows the number of hours beforethe dishwasher will start.BUTTONSUse this button to start the dishwasher after selecting a wash cycle orthe rinse cycle (see page 16). It can also be used to pause thedishwasher in the middle of a wash or rinse cycle (see page 17).This wash setting is best for normal soil.This wash setting is best for very dirty tableware and cookware.This wash setting is best for china, crystal, or glass. It is also good forlightly soiled items that have been pre-rinsed.Press this button if you want to run the rinse portion of the cycle only.The dry cycle will not run. Also, use this setting to rinse tableware thatyou do not want to wash right away.This feature allows you to set the dishwasher to start at a later time (seepage 18).This feature can be used with the normal wash cycle only. It rinses thedishware with rinse water that is 5 degrees hotter than the regular cyclerinse water for maximum sanitization and drying (see page 17).Use this button to stop the dishwasher in the middle of a cycle (see page16).A safety feature. This button locks the control panel to prevent childrenfrom tampering with it (see page 19).NORMALHEAVYSECURERINSEDELAYSANIRINSECRYSTALCANCELSTARTSTOPNumeric DisplaySANITIZEDRINSE AIDDIAGNOSTICWASHINGRINSINGDRYINGCLEANFLOOR GUARDSTARTSTOP NORMAL HEAVY CRYSTAL RINSE DELAY SANIRINSE SECURECANCELControl PanelIndicator Lights