Dacor DCT365S Distinctive Series Use And Care Manual

Also see for Distinctive DCT365S: Specifications Use and care manual

Contents

Dacor DCT365S Distinctive Series Use And Care Manual Manual pdf 7 page image

5Burner and Grate AssemblyWARNINGNever attempt to operate the cooktop with any of theburner parts removed. Assemble the burners and gratesonly when the cooktop is cool.SimmerSear Burner1. Install the SimmerSear burner ring on the Sim-erSear burner base (located on the center of thecooktop). Line up the indentations on the bottomof the burner ring with the pins on top of theburner base.2. Set the outer SimmerSear burner cap on top ofthe burner ring. Make sure it is centered on top.3. Set the inner SimmerSear burner cap on thecenter of the burner base. Line up the ridgeon the bottom of the cap with the pins on thecenter of the burner base.Standard Burners1. Install the standard burner rings on the standardburner bases (match sizes). Put the holes on theedge of each ring over the igniter. Center thetabs on the bottom of each ring in the hole inthe center of each base.2. Install all the standard burner caps. The ridge onthe bottom of each cap must surround the top ofeach ring.GratesGently set the grates on top of the spill tray. Put thelegs of each grate into the corresponding dimples.IMPORTANT: Each grate is different. Orient themas shown. Each grate has a slot on the bottom thatmatches up with a notch on the spill tray. The slotson the grates all go toward the back of the cooktop.Setting Up Your CooktopInner burner capOuter burner capBurner ringPin onburner baseRidge on bottomSimmerSear Burner Assembly(Center Burner)StEP 1StEP 2StEP 3StEP 2StEP 1Igniter holeBurner ring -top viewIgniter on burner baseStandard Burner AssemblyRidge onbottom ofburner capCAUtION: Top ofigniter is sharpSlot onbottomSlot onbottomSlot onbottomStandard burnerNotchLeft grate,curved fingerson left Center grateRight grate,curved fingerson rightSimmerSear burner