All specifications subject to change without notice. Phone: (800) 793-0093www.dacor.comPLANNINGGUIDEDYF42BNDI, DYF48BNDIDiscovery 42” and 48” WideBuilt-In Custom Panel RefrigeratorsDocument # PG11-013 Revised 02/04/13 Page 3/5NOTE: Additional space may be required depending on the overlay panelthickness (see below).To adjust the door swing, see the installation instructions.Allow a minimum of 4½” (11.4 cm) of space between the side of therefrigerator and a corner wall. More clearance may be needed if thickercustom panels or custom handles are used. Do not overlook baseboards.refrigerator toCabinet ClearanceDoor Swing 90°Door Panels and Cabinetry Clearance - Door Swing 110°The custom door panels and adjacent cabinetry must be designed so thatthere is sufficient clearance for the doors to swing open. If the refrigerator isto be installed close to the wall, see Door Swing 90°.Door Swing DimensionsThe location must permit both doors to open to a minimum of 90°. Allow4½” (11.4 cm) minimum space between the side of the refrigerator and acorner wall.Model DYF42BNDi130˚130˚90˚90˚110˚110˚47 7⁄8 "(121.6 cm)411⁄2 "(105.4 cm)16 7⁄8 "(42.9 cm)12 5⁄8 "(32.1 cm)37 1⁄4 "(94.6 cm)41 3⁄8 "(105.1 cm)130˚130˚90˚90˚110˚110˚513⁄8 "(130.5 cm)44"(111.8 cm)19 1⁄4 "(48.9 cm)14 3⁄8 "(36.5 cm)39"(99.1 cm)43 7⁄8 "(111.4 cm)Model DYF48BNDiSpacer Panel¼" (6.35 mm)¾" (1.9 cm)1" (2.5 cm)½" (1.3 cm)1"1 ¼"1 ½"1"(2.5 cm)1 ¼(3.2 cm)"1½(3.8 cm)"RefrigeratorSide TrimDoorHingeBacker PanelOverlay Panel(2.5 cm)(3.2 cm)(3.8 cm)(1.3 cm)Cabinetry(1.9 cm)½"¾"When the doors are closed therefrigerator will extend beyondthe face of the adjacent cabinetsto some degree.NOTE: Rout the hinge sideof the custom door panels toa radius that is equal to atleast half the thickness of thepanel if a 130° door swing isdesired. See the installationinstructions.refrigerator toCabinet ClearanceDoor Swing 110°RefrigeratorSide TrimDoorBacker PanelOverlay PanelHingeSpacer PanelCabinetry90˚ DoorStop Position¼" (6.35 mm)¾" (1.9 cm)¾"(1.9 cm)1" (2.5 cm)½" (1.3 cm)½"(1.3 cm)1"(2.5 cm)1"(2.5 cm)1 ¼(3.2 cm)1½(3.8 cm)(1.3 cm)(1.9 cm)½"¾"