Dacor Discovery EO127 Installation Instructions Manual

Also see for Discovery EO Series: Installation instructions Use and care manual Use and care manual Use and care manual Use and care manual

Contents

Dacor Discovery EO127 Installation Instructions Manual Manual pdf 11 page image

9Planning the InstallationInstallation InstructionsElectrical SpecificationsIMPORtANt• Preheat times and cavity temperature recovery timeswill be increased slightly if operating on less than a240 Vac circuit.• This appliance is provided with electrical connectionleads in a flexible metal conduit. These leads may bea smaller gage than the standard household wiring ofthe dedicated supply circuit, but they are suitable forconnection to these circuits under the jurisdiction ofthe National Electric Code, and/or the local inspectionauthority.• Locate the junction box so that the wiring may be dis-connected without removing the oven from the wall.It is the owner’s responsibility to ensure that a qualifiedelectrician performs the electrical connection of this appli-ance. The electrical installation, including minimum supplywire size, must comply with the National Electric CodeANSI/NFPA 70 (latest revision) and local codes and ordi-nances.A copy of this standard may be obtained from:National Fire Protection Association1 Batterymarch ParkQuincy, Massachusetts 02269-9101The correct voltage, frequency and amperage must be sup-plied to the appliance from a dedicated, grounded, singlephase circuit that is protected by a properly sized circuitbreaker or time-delay fuse. If a time-delay fuse is utilized,fuse both sides of the line (L1 and L2).Model type Dedicated CircuitRequirementstotalConnected LoadSingle 27” 240 Vac 60 Hz.,4 wire*, 30 Amp.dedicated4.6 kW (19.5 Amp.)Single 30”Double 27” 240 Vac 60 Hz.,4 wire*, 50 Amp.dedicated9.25 kW (38.9 Amp.)Double 30”* Two 120 Vac hot (L1 and L2), one neutral, one ground.The above electrical ratings are for reference only. For theexact ratings see the product data plate. See page 3 forlocation.Verify that all the parts are included. If any item is missingor damaged, please contact your dealer immediately. Alsomake certain that you have all tools and parts necessary toensure a proper installation before proceeding.• Exhaust deflector◊ 27” defector - PN 46050Bor◊ 30” deflector - PN 46051B• Mounting and exhaust deflector screw kit◊ Single oven screw kit - four (4) 3/4” mountingscrews, four (4) 1 1/4” mounting screws and three(3) exhaust deflector screws - PN 700486-1or◊ Double oven screw kit - Six (6) 3/4” mountingscrews, six (6) 1 1/4” mounting screws and three(3) exhaust deflector screws - PN 700486-2• Meat probe, one (1) - PN 72723• Broiler grill and pan - PN 12157Parts List• Standard oven racks two (2) for a single oven, five (5)for a double oven◊ 27” standard rack - PN 72747or◊ 30” standard rack - PN 72713• GlideRack™ oven rack, one (1)◊ 27” GlideRack™ oven rack - PN 72948or◊ 30” GlideRack™ oven rack - PN 72949• Stainless steel cleaner - stainless steel models onlyPN A302• Product literature