2Verifying the Package ContentsVerify that all required components have beenprovided. If any item is missing or damaged,please contact your dealer immediately. Do notinstall a damaged or incomplete appliance.• Mounting Screws• Use & Care Videotape• Oven Racks• Broiler Grill and Pan• Exhaust Grill/Lower Trim• Rear Top TrimInstallation PlanningA qualified technician must complete theinstallation of this built-in appliance. Properinstallation is your responsibility.Carefully check the location where the oven isto be installed. The oven should be placed forconvenient access, but away from drafts thatmay be caused by doors, windows and HVACoutlets. Make certain that electrical power canbe provided in the selected location.Plan the installation so that all minimumclearances are met or exceeded. Dimensionsshown provide minimum clearances, unlessotherwise noted. Be certain that properclearance is provided for the oven door when itis in the open position.The specified minimum cabinet depth and widthmust be provided. The cabinet depth and widthmust completely enclose the recessed portion ofthe oven.Cabinet cutout dimensions must be used asindicated. All contact surfaces between theappliance and the cabinet must be solid andlevel. The oven support platform must be flushwith the bottom edge of the cabinet cutout.Make certain that you have everythingnecessary to ensure a proper installation beforeproceeding.NOTE:All dimensional tolerances are+ 1/16”, - 0” unless otherwisestated.DacorModel NumberCutout Width“A”Cutout Height“B”Minimum CabinetOverall Depth“C”Minimum CabinetWidth“D”ECS127 25 1/2”(648mm)27 3/8”(695mm)24”(610mm)27”(686mm)MCS127ECS13028 1/2”(724mm)30”(762mm)PCS130MCS130ECS136 34 1/2”(876mm)27 3/4”(705mm)36”(914mm)ECS22725 1/2”(648mm)49 1/16”(1246mm)27”(686mm)MCS227ECD227MCD227ECS23028 1/2”(724mm)30”(762mm)PCS230MCS230ECD230PCD230MCD230Cutout Dimensions1 1/2" (38mm)Typical counter top36"(915mm)"A""C""B"1"D"3"4"Electricalaccess3/4" (19mm)Support platform(flush with cutout)1" (25mm) Minimumto combustible floor13/4" (19mm)Support platform(flush with cutout)Recommendedelectricalaccess1" (25mm) Min.clear to top ofdoors for heatexhaust 9 5/8"(244mm)Recommended(may be altered)**"B"3"4""A"24"(610mm)Minimum interiorcabinet depth"D"Alternateelectricalaccess 231 1/4"(794mm)Recommended(may be altered)"B"3"24"(610mm)Min. interiorcabinet depth"A"3/4" (19mm)Support platform(flush with cutout)4""D"Alternateelectricalaccess1" (25mm) Min.clear to top ofdoors for heatexhaust12RecommendedelectricalaccessSingle Wall OvenCutout DimensionsDouble Wall OvenCutout DimensionsSingle Wall Oven Installed under-counterCutout DimensionsNOTE:Electrical junction box may belocated:1. Above the oven cutout, to theright.2. Below the oven platform, tothe right.