Dacor EF36LNBSS Installation Instructions Manual

Also see for EF36LNBSS: Dimensions Use and care manual Installation instructions

Dacor EF36LNBSS Installation Instructions Manual Manual pdf 19 page image

17IMPORTANT:Install the custom handles prior to installing the panels on therefrigerator.Create custom door overlay panels according to thespecifications in the Custom Panels and Handles section.Dacor is not responsible for customer installed molding ordecorative panels that need to be removed or replaced toservice the refrigerator.Handle InstallationBefore installing a custom panel assembly, install the customhandle hardware.Counter-sink the screw head into the back of the panel to allowthe panel to slide into place smoothly and for proper fit.Door Panel InstallationRemove all tape and door bracing from the refrigerator and1.freezer doors.Open the refrigerator and freezer compartment doors.2.Installation InstructionsCustom Panel and Handle Installation - IF36 Series ModelsA. Countersunk screwSide ViewB. HandleC. Door panel assemblyBACFront ViewRemove the3.trims andcorner caps.Slide the4.custompanels intothe bottomand hingeside trimson therefrigeratorcompartmentand freezercompartmentdoors,making surethat thebacker panelfits into thehinge sidetrims.Reinstall the5.trims andcorner caps.Remove the protective6.skin from the screwcovers. Slide or snap thescrew covers into thehandle trim section.Check refrigerator level7.and alignment. Adjust ifneeded.Continued...A. Corner capsB. Refrigerator door trimsC. Freezer drawer trimBACAAD. PanelsDD