Dacor EOR series Use And Care Manual

Also see for EOR series: Installation instructions Use and care manual Installation instructions Installation instructions Planning guide

Dacor EOR series Use And Care Manual Manual pdf 29 page image

27warning• To prevent electrical shock and/or personal injury, makecertain that the oven and light bulb(s) are cool and that powerto the oven has been turned off at the main power supplybefore replacing the light bulb(s).• Always make sure the lens covers are in place when usingthe oven(s). The lens covers protect the light bulbs frombreakage caused by high oven temperatures or mechanicalshock.• Replacing the lens cover without lining up the cut-out with thelight socket will damage the light fixture.• Do not use a screwdriver to remove the lens.Light bulb replacement is considered to be a homeownermaintenance operation. if the lights do not work, beforereplacing them, please consult the Problem SolutionGuide on page 29.importantDo not touch the replacement halogen light bulbs withyour fingers. Halogen bulbs are sensitive to the oilsfrom your hand. the oils from your hand will stick tothe bulb and cause it to burn out faster than normal.Care and CleaningTo replace the light bulbs...1. replace the light bulb only with Dacor part number100429. see the page 28 for ordering information.2. turn off power to the oven at the circuit breaker panelor fuse box.3. hold your hand under the lens for support and gentlypry it loose using a spatula or table knife. pull the lenscover straight out.4. grasp the old bulb and pull it straight out of thesocket.5. using a glove, insert the new bulb into the socket.6. as you reinstall the lens cover, line up the cutout onthe inside rim with the light socket. gently press itinto its original position.7. turn the power to the oven back on at the main powersupply.8. reset the clock (see page 8).LightbulbLightsocketcutout on insiderim of lensReplacing the Light Bulbs