Dacor Epicure OB36 Installation Instructions Manual

Also see for Epicure OB36: Use and care manual Use & care manual Planning guide Use and care manual Planning guide

Contents

Dacor Epicure OB36 Installation Instructions Manual Manual pdf 17 page image

15Installation InstructionsFinal Assembly and TestAssemble the Grill1. Open the canopy on the unit.2. Insert the drip tray completely into the slot on the frontof the unit.3. Put the flame spreaders on the floor of the appliance,inside the canopy. The large holes go toward the frontof the unit. The holes are used to light the burners incase of power failure. Push the spreaders as far to theright as possible, leaving an opening on the left for thesmoker box.4. Install the grills on the shelves above the flame spread-ers. Push the grills as far to the right as possible, leav-ing an opening on the left for the smoker box.5. Insert the smoker box into the opening to the left sideof the grills.6. Place the warming rack on the holders on the wallsinside the canopy.9 Burner cover8 Grate7 Burner heads and caps1 Open canopy6 Warming rack2 Drip tray3 Flame spreaders4 Grills5 Smoker boxAssemble the Side Burner - 52 Inch Models7. Put the burner heads on to the burner bases. Line upthe slots on each head with the pins on the base sothat it lies flat. Put the burner caps on top of the burnerheads. Line up the slots on each cap with the pins onthe base so that it lies flat.8. Put the grate over the top of the side burner. Line upthe legs with the dimples on the top of the side burnerchassis.