Dacor RNHP30 Renaissance Installation Instructions Manual

Also see for RNHP30 Renaissance: Use and care manual Installation instructions Installation instructions Use and care manual Use and care manual

Dacor RNHP30 Renaissance Installation Instructions Manual Manual pdf 3 page image

1Important Information AboutSafety Instructions• The Important Safety Instructions and warnings inthese instructions are not meant to cover all possibleproblems and conditions that can occur. Use commonsense and caution when installing, maintaining or oper-ating this or any other appliance.• Always contact the Dacor Customer Service Teamabout problems and conditions that you don’t under-stand.Important Safety InstructionsSafety Symbols and LabelsDANGERImmediate hazards that WILL result in severe personalinjury or death.WARNINGHazards or unsafe practices that COULD result in severepersonal injury or death.CAUTIONHazards or unsafe practices that MIGHT result in minorpersonal injury or property damage.DANGERTo avoid the possibility of explosion or fire, do not store or use combustible, flammable or explosive vapors and liquids(such as gasoline) inside or in the vicinity of this or any other appliance. Also keep items that could explode, such asaerosol cans away from cooktop burners, ovens and range hoods. Do not store flammable or explosive materials inadjacent cabinets or areas.WARNINGIf the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personalinjury or death.WARNINGWARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THEFOLLOWING:a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.b) Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting meansto prevent power from being switched on accidentally. When the service disconnecting means cannot belocked, securely fasten a prominent warning device, such as a tag, to the service panel.WARNINGWARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THEFOLLOWING:a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicablecodes and standards, including fire-rated construction.b) Sufficient air is needed for proper combustion and exhausting of gases through the flue(chimney) of fuelburning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safetystandards such as those published by the National Fire Protection Association (NFPA), and the AmericanSociety for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.c) When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.d) Ducted fans must always be vented to the outdoors.READ AND SAVE THESE INSTRUCTIONS