Dacor Renaissance RNTT365GB Use And Care Manual

Also see for Renaissance RNTT365GB: Installation instructions Planning guide

Contents

Dacor Renaissance RNTT365GB Use And Care Manual Manual pdf 11 page image

9Setting the Clock1. Make sure the cooktop is on (the burner dis-plays are lit).• If necessary to power on, Touch the ON/OFFbutton for two seconds.2. Touch the clock and lock buttons for atleast 3 seconds. The current time appears onthe display (hours will be flashing).3. Touch the clock “—” and “+” buttons (tothe right of the clock button) to set the hours.4. Touch the clock button. The minutes will beginto flash.5. Touch the clock “—” and “+” buttons to setthe minutes.6. Save the settings: Touch the clock button toset the changes.7. The current time mode appears on the display(hours will be flashing).Locking the Control PanelYou can lock the control panel to reduce thechance of a burner being turned on unintentionallyor to make it more difficult for children to operatethe controls.Refer to the Burner Control diagram during theseinstructions.IMPORTANT: The cooktop must be off (theburner displays not lit) to activate the controlpanel lock.To lock the control panel:1. Touch and hold the lock button forabout 3 seconds.• The control panel will beep, and a• decimal point will appear on all burnerdisplays.This confirms the control panel is locked.To unlock the control panel:1. Touch and hold the lock button forabout 3 seconds.• The control panel will beep, and the• decimal points will disappear from the burnerdisplays.• The control panel is unlocked.Operating Your CooktopClock ButtonLockButtonClock “+”ButtonClock “—”ButtonClockButtonBurner ControlBurner displayLock ButtonLock ButtonON / OFFButtonClock-Setting ButtonsControl Panel Buttons: Clock SettingLockButtonLeft FrontBurnerSearBurner ON / OFFButtonControl Panel Buttons: Panel LockingControl Panel Lock Buttons + DisplayLeft RearBurner