34Notes on special playback features (EG:FFW or FBWD)Horizontal lines (noise bars) will appear on the TV screen. This is normal.The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slightinterference may be observed during this time.Fast Forward/BackwardThis function lets you visually search forward and backward for a desired scene on your tape.1 Press [REW] or [FF] during playback.Search mode will be activated.If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR willautomatically resume Play mode to protect the tape and video heads.2 To return to normal playback, press [PLAY].Still Picture1 Press [PLAY/PAUSE] during playback.A still picture appears on the TV screen.If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR willautomatically resume Play mode to protect the tape and video heads.2 To return to normal playback, press [PLAY].Slow Motion1 Press [SLOW+] for Slow Motion playback.2 Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.Counter Memory FunctionThis is useful if there is a section of tape you want to view immediately after recording or if you want to returnto the same point several times.1 Begin recording or playing a tape.2 At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continueto play or record.3 Press [STOP] when recording or playback finishes.4 You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by selecting "Go-to-Zero" function under ‘SETUP’ ➝ ’Preferences’ ➝ ’VCR’. See page 26.Special Playback FeaturesVCR PlaybackDF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 34 mac001 1200DPI 90LPI