PLAYBACK RECORDING37Recording from TVFollow the instructions below to record a TV program.1 Turn on the DVD Recorder+VCR and load a recordable disc or tape.Make sure your TV input is set to view the DVD Recorder+VCR.2 Set the desired Recording mode by pressing [REC MODE] repeatedly.DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP(Super Long Play - 8 hrs/disc).VCR: SP (Standard Play), LP (Long Play - 2 times SP)3 If your DVD Recorder+VCR does not show a TV program, press [INPUT] on the remote control. Use [PR+/–] toselect the TV channel you wish to record.4 Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono).The table below shows what audio channel will be recorded with different settings and different types ofbroadcasts.The last column (Monitor Audio) shows what you will hear during recording. For example, if the TVbroadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,and the Monitor Audio will also be in Stereo.5 Press [REC ()] once.Recording will start. The REC indicator lights on the front panel display.Recording continues until you press [STOP] or the disc is full.To record for a fixed length of time, see One Touch Record.6 Press [STOP ()] to stop recording.• The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,the recording will not be saved.• If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading isfinished.• If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes (it depends on disc) for postprocessing after recording.Broadcast Audio MonitorL Ch R Ch AudioMONO MONO MONO MONO MONOSTEREO L R STEREOMONO MONO MONO MONOBIL I BIL I BIL I BIL IBIL II BIL II BIL II BIL IITV BroadcastSTEREOBILSelected AudioBasic RecordingBasic RecordingDF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 37 mac001 1200DPI 90LPI