Daewoo DF-4501PV User Manual

Contents

Daewoo DF-4501PV User Manual Manual pdf 16 page image

15INTRODUCTION CONNECTIONSIf your cable wire is connected to your TV without aconverter or descrambler box, unscrew the wire fromyour TV and attach it to the RF IN (FROM ANT.) jackon the rear panel of the DVD Recorder + VCR.Use the supplied RF cable to connect between theDVD Recorder + VCR’s OUT (TO TV) jack and theantenna input jack on your TV. With this connection,you can receive all midband, superband, andhyperband channels (all cable channels).ConnectionsConnectionsConnecting Antenna/Cable1 Disconnect the antenna/cable from the rear ofyour TV.2 Connect this cable to the jack marked RF IN(FROM ANT.) on the rear panel of the DVDRecorder + VCR.• There are a variety of ways to connect theDVD Recorder + VCR to your TV and otherequipment. Use only one of the connectionsdescribed below. Whichever TV connectionyou use will work with all input sources.• Please refer to the manuals for your TV, VCR,stereo system, or other devices as necessaryto make the best connections.• For better sound reproduction, connect theDVD Recorder + VCR’s AUDIO OUT jacks tothe audio in jacks of your amplifier, receiver,stereo, or audio/video equipment. See‘Connecting an Amplifier/Receiver‘ on page 17.Caution• Make sure the DVD Recorder + VCR isconnected directly to the TV, and the TV is setto the correct video input.• Do not connect the DVD Recorder + VCR’sAUDIO OUT jack to the phone in jack (recorddeck) of your audio system.• Do not connect the DVD Recorder + VCR viayour VCR. The DVD image could be distortedby the copy protection system.Antenna Antenna Cable TVWall JackFlat Wire(300ohm)300/75ohm Adapter(Not supplied) or orRear of DVD Recorder + VCRTo enable you to set up your new DVDrecorder+VCR, it must be connected it toyour TV using either a SCART cable or aCOMPONENT and associated AUDIO cable.DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 15 mac001 1200DPI 100LPI